CLEARWATER, FL – December, 2025 – Actron Engineering, a leader in high-precision manufacturing solutions, is proud to announce a significant expansion of its production facility through the acquisition of 14 new high-performance machines scheduled for installation throughout 2025. This strategic investment is designed to meet the growing demand for complex components in the aerospace, defense, and medical industries while drastically reducing lead times through advanced automation. The 2025 expansion focuses on four core pillars of manufacturing excellence: Automation, Large-Scale Machining, High-Precision 5-Axis Milling, and Precision Forming. Unlocking Production with Horizontal FMS At the heart of this expansion is the introduction of the Toyoda FH450S Horizontal Flexible Manufacturing System (FMS). Featuring an 8-pallet pool, this system enables "lights-out" manufacturing, allowing Actron to operate continuously without manual intervention. This is complemented by two Toyoda FH5000S Horizontal Twin Pallet Machines, which provide the rigidity and speed required for high-volume production of mission-critical parts. Elevating Complexity with 5-Axis Technology To address the increasing complexity of modern engineering designs, Actron is adding three new 5-axis machining centers: One Haas UMC-750: Optimized for high-speed, multi-sided machining. One Haas UMC-1250: A large-capacity 5-axis powerhouse capable of handling substantial workpieces that require intricate geometric tolerances. Expanded Vertical Milling and Precision Forming The expansion also reinforces Actron’s core milling capabilities and sheet metal department: Five Haas VF-2SS Super-Speed Verticals: Ideal for rapid cycles and high-accuracy small parts. One Haas VF-9 Vertical: Providing the large-envelope capacity needed for oversized structural components. One Haas VF-4 Vertical: High-performance, efficient, and cost-effective choice for high-speed production of smaller, high-precision parts. One Amada HRB1303-M15 Press Brake: A state-of-the-art bending solution that ensures precision accuracy for complex sheet metal fabrication. "This 2025 equipment installation represents the commitment we have to our customers’ needs now and into the future," said John Staszewski, President & CEO of Actron Engineering. "By integrating the Toyoda FMS and expanding our Haas 5-axis fleet, we aren't just adding machines—we are adding the ability to solve more complex challenges for our customers, allowing us to Meet the Mission with Experience and Capabilities." The new equipment will be integrated into the existing Actron Engineering facility, supported by the company’s robust quality management systems and expert engineering team. About Actron Engineering: Actron Engineering is an AS9100D and ISO 9001:2015 certified manufacturer specializing in precision CNC machining, sheet metal fabrication, and complex assembly. Serving the world’s leading prime contractors in the aerospace, defense, and satellite industries, Actron is dedicated to delivering superior craftsmanship for mission-critical applications.
CLEARWATER, FL – October, 2025 – Actron Engineering , a leading provider of high-precision manufacturing for the Aerospace and Defense sectors, is proud to announce the addition of the Haas HL-50E Laser Engraving System to its facility. This investment marks a strategic expansion of Actron’s finishing and compliance capabilities, ensuring the highest standards of permanent part identification and serialization. In the Aerospace and Defense industries, part traceability is paramount. The Haas HL-50E allows Actron to provide permanent, high-resolution marking on a vast array of materials, including hardened steels, titanium, and anodized aluminum, without compromising the structural integrity of the component. Precision Marking for Mission-Critical Compliance The HL-50E system enables Actron to meet stringent Department of Defense (DoD) requirements, including Unique Identification (UID) marking and high-density 2D barcodes. This ensures that every flight-critical component can be tracked throughout its entire lifecycle, from the assembly floor to the field. "The addition of the Haas HL-50E is a direct investment in the reliability and transparency our customers demand," said John Staszewski, President & CEO of Actron Engineering. "By bringing high-speed, precision laser engraving in-house, we are streamlining our production timeline and ensuring every part leaves our facility with the exact specifications required. We remain committed to Meeting the Mission through Experience and Capabilities." Key Advantages of the Haas HL-50E Integration: High-Resolution Traceability: Crisp, permanent engraving of serial numbers, logos, and complex data matrices. Material Versatility: Capability to mark delicate aerospace components and rugged defense hardware alike. Enhanced Lead Times: Eliminates the need for third-party marking services, allowing for faster delivery of finished assemblies. Non-Destructive Identification: Precision laser technology ensures clear marking without the mechanical stress of traditional stamping. The integration of the HL-50E Laser Engraver is the latest step in Actron Engineering’s 2025 growth initiative, further solidifying its role as a comprehensive, single-source manufacturing partner. About Actron Engineering: Actron Engineering is an AS9100D and ISO 9001:2015 certified manufacturer specializing in precision CNC machining, sheet metal fabrication, and complex assembly. Serving the world’s leading prime contractors in the aerospace, defense, and satellite industries, Actron is dedicated to delivering superior craftsmanship for mission-critical applications.
CLEARWATER, FL - July 2025 -Actron Engineering has entered into an agreement with Craig Rennick to acquire Crabil Manufacturing Inc., an AS9100 certified CNC precision machining solutions provider focused on the aerospace and defense industries. This acquisition significantly expands Actron's capabilities and capacity, especially with Crabil’s unique expertise in supporting complex, high-precision applications. Crabil’s core machining and manufacturing services will continue uninterrupted in its St. Petersburg, Florida facility, just a few miles from Actron’s Clearwater based facilities. Meaningful investments are planned to support Crabil’s growth and enhance the collective ability to serve existing and new customers at the highest level. Craig Rennick will continue to serve as President of Crabil and will be supported by his existing team of skilled machinists and staff members. “The acquisition of Crabil Manufacturing by Actron marks the beginning of an exciting new chapter. Together, we'll harness our collective strengths, innovate, and pave the way for a bright future for our people and customers”, added Craig Rennick. “We are extremely pleased to join with Crabil Manufacturing and welcome Craig and the Crabil team in becoming part of Actron. The combination builds upon Actron’s already technically strong engineering and manufacturing capabilities and makes both companies stronger” said John Staszewski, CEO of Actron Engineering.
Kirtland Capital Partners acquired Actron Engineering in August 2024 in a partnership with tenured senior management, John Staszewski, now CEO and Alana Dergham, now CFO, who also invested in the transaction and have equity interest in the company. Actron will operate as a subsidiary of the newly formed Actron intermediate Corporation. Actron's core engineering & manufacturing services will continue to be the focus for the business. Meaningfully investments are planned for supporting growth. The company plans to add complementary, state-of-the-art capabilities that enhance the ability to meet the demanding technical requirements of customer applications.